Asus RS720-E9 Series Скачать руководство пользователя страница 75

Страница: 75 / 194

2-49

ASUS RS720-E9 Series

2.8

Removable/optional components

This section explains how to install optional components into the system and covers the

following components:

System fans

Redundant power supply module

Ensure that the system is turned off before removing any components.

You may need to remove previously installed component or factory shipped components

when installing optional components.

2.8.1

System fans

To remove the system fans:

Locate the fans you want to replace.

Press the retaining clip (A) and lift

upward (B) to remove the fan.

To reinstall the system fans:

Replace the fan with the same model

and size.

Align and position the fan with the arrow

on the fan pointing to the back of the

chassis (C).

Install the fan to the fan cage.

The fan can only be installed in one direction. If the fan cannot be installed, turn it around

and try again.

Содержание RS720-E9 Series



































































































































































































Результаты поиска

Содержание RS720-E9 Series

Отзывы:

Похожие инструкции для RS720-E9 Series

Бренды по названию

Популярные бренды

Asus RS720-E9 Series, Руководство пользователя

Результаты поиска

Содержание RS720-E9 Series

Отзывы:

Похожие инструкции для RS720-E9 Series

Бренды по названию

Популярные бренды