Asus RS520-E9-RS12-E Скачать руководство пользователя страница 135

Страница: 135 / 178

ASUS RS520-E9 Series

5-43

Pressing <Esc> does not immediately exit this menu. Select one of the options from this

menu or <F10> from the legend bar to exit.

Discard Changes & Exit

Exit System setup without saving any changes.

Save Changes & Reset

Exit System setup after saving the changes.

Restore Defaults

Restore/load default values for all the setup options.

Boot Override

These items displays the available devices. The device items that appears on the screen

depends on the number of devices installed in the system. Click an item to start booting from

the selected device.

5.12

Save & Exit menu

The Exit menu items allow you to save or discard your changes to the BIOS items.

Содержание RS520-E9-RS12-E



















































































































































































Результаты поиска

Содержание RS520-E9-RS12-E

Отзывы:

Бренды по названию

Популярные бренды

Asus RS520-E9-RS12-E, Руководство пользователя

Результаты поиска

Содержание RS520-E9-RS12-E

Отзывы:

Бренды по названию

Популярные бренды