Asus RS100-E5 - 0 MB RAM Скачать руководство пользователя страница 15

Страница: 15 / 148

ASUS RS100-E5-PI2

1-5

1.4

Front panel features

The barebone server displays a simple yet stylish front panel with easily accessible

features. The power and reset buttons, LED indicators, optical drive, and two USB

ports are located on the front panel.

Refer to section

1.6.1 Front panel LEDs

for the LED descriptions.

Optical drive

USB 2.0 ports

HDD Access LED

LAN2 LED

LAN1 LED

Power LED

Reset button

Power

button

1.5

Rear panel features

The rear panel includes the expansion slots, and system power socket. The middle

part includes the I/O shield with openings for the rear panel connectors on the

motherboard.

The ports for the PS/2 keyboard, PS/2 mouse, USB, VGA, and Gigabit LAN do

not appear on the rear panel if motherboard is not present.

AC power socket

USB 2.0 ports

PS/2 mouse port

PS/2 keyboard port

Serial port

VGA
port

LAN port 2

LAN port 1 (SOL

Shared LAN)

Expansion slot

iKVM port*

* This port is for ASUS ASMB3-SOL or ASMB3-iKVM controller card only.

Содержание RS100-E5 - 0 MB RAM





















































































































































Результаты поиска

Содержание RS100-E5 - 0 MB RAM

Отзывы:

Asus RS100-E5 - 0 MB RAM, Руководство пользователя, Страница: 15 / 148

Результаты поиска

Содержание RS100-E5 - 0 MB RAM

Отзывы: