Asus ROG STRIX B360-H GAMING, Руководство пользователя

Страница: 59 / 74

ROG STRIX B360-H GAMING
3-13
Chapter 3
3.6.5 PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show
Empty
if no SATA device is installed to the corresponding SATA port.
SATA Controller(s)
This item allows you to enable or disable the SATA Device. Configuration options: [Enabled]
[Disabled]
SMART Self Test
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
SATA6G_1(Charcoal Black) - SATA6G_6(Charcoal Black)
SATA6G_1(Charcoal Black) - SATA6G_6(Charcoal Black)
This item allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode Selection is set to [
AHCI
] and allows
you to enable or disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.6.7 Onboard Devices Configuration
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio
This item allows you to use the Azalia High Definition Audio Controller.
Configuration options: [Disabled] [Enabled]
M.2_1 Configuration
[Auto] Automatically detects the M.2 device mode. If a SATA device is detected,
SATA6G_2 port will be disabled.
[SATA] Supports M.2_1 SATA devices only. SATA6G_2 port will be disabled.
[PCIE] Supports M.2_1 PCIe devices only.
3.6.6 PCH-FW Configuration
This item allows you to configure the firmware TPM.