Asus ROG MAXIMUS X HERO Скачать руководство пользователя страница 88

Страница: 88 / 110

3-28

Chapter 3: BIOS Setup

ap
te

3.11.2

ASUS EZ Flash 3

ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet

without having to use a bootable oppy disk or an OS-based utility.

Updating through the Internet varies per region and Internet conditions. Check your local

Internet connection before updating through the Internet.

To update the BIOS by USB:

Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select

ASUS EZ Flash Utility

and press <Enter>.

Insert the USB ash disk that contains the latest BIOS le to the USB port.

Select

via Storage Device(s).

Press <Tab> to switch to the Drive eld.

Press the Up/Down arrow keys to nd the USB ash disk that contains the latest BIOS,

and then press <Enter>.

Press <Tab> to switch to the Folder Info eld.

Press the Up/Down arrow keys to nd the BIOS le, and then press <Enter> to perform

the BIOS update process. Reboot the system when the update process is done.

Содержание ROG MAXIMUS X HERO















































































































Результаты поиска

Содержание ROG MAXIMUS X HERO

Отзывы:

Asus ROG MAXIMUS X HERO, Руководство пользователя, Страница: 88 / 110

Результаты поиска

Содержание ROG MAXIMUS X HERO

Отзывы: