background image

ix

P8H61 Series specifications summary

(continued on the next page)

CPU

LGA1155 socket for Intel

®

 Second Generation Core™ i7 / Core™  

  i5 / Core™ i3 processors 

Supports 32nm CPU 

Supports Intel

®

 Turbo Boost technology 2.0 

* The Intel

®

 Turbo Boost technology 2.0 support depends on the  

  CPU types.

** Refer to www.asus.com for Intel

®

 CPU support list.

Chipset

Intel

®

 H61 Express Chipset

Memory

2 x DIMMs, max. 16GB*, DDR3 1333 / 1066 MHz, non-ECC, 

 

  un-buffered memory 

Dual-channel memory architecture 

Supports Intel

®

 Extreme Memory Profile (XMP)

 

* The maximum 16GB memory capacity can be supported with  

  8GB or above DIMMs. ASUS will update the memory QVL once  

  the DIMMs are available in the market. 

** Refer to www.asus.com for the latest Memory QVL (Qualified 

 

  Vendors List).

***  When you install a total memory of 4GB capacity or more, 

Windows

®

 32-bit operating system may only recognize less 

than 3GB. We recommend a maximum of 3GB system memory 

if you are using a Windows

®

 32-bit operating system. 

Expansion slots

1 x PCI Express 2.0 x16 slot 

2 x PCI Express 2.0 x1 slots 

3 x PCI slots

Storage

Intel

®

 H61 Express Chipset:

  -  4 x Serial ATA 3.0 Gb/s connectors

LAN

Realtek

®

 8111E Gigabit LAN controller

Audio

Realtek

®

 ALC887 8-channel* High Definition Audio CODEC

 

*   Use a chassis with HD audio module in the front panel to 

support an 8-channel audio output.

USB

P8H61 and P8H61 PLUS:

 

  -  10 x USB 2.0/1.1 ports (6 ports at the mid-board, 4 ports at    

    the back panel) 

P8H61/USB3: 

 

Intel

®

 H61 Express Chipset: 

    -  8 x USB 2.0/1.1 ports (6 ports at the mid-board, 2 ports   

      at the back panel) 

  Asmedia USB3.0 controller: 

    -  2 x USB 3.0/2.0 ports (blue, at the back panel)

Содержание P8H61










































































Отзывы: