Asus P5G41T-M LX V2 Скачать руководство пользователя

Страница: 54 / 62

2-16

Chapter 2: BIOS information

2.5.5

APM Configuration

Restore on AC Power Loss [Power Off]

When set to

[Power Off]

, the system goes into off state after an AC power loss. When set

[Power On]

, the system goes on after an AC power loss. When set to

[Last State]

, the

system goes into either off or on state, whatever the system state was before the AC power

loss. Configuration options: [Power Off] [Power On] [Last State]

Power On By RTC Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake event. When this item is set to

Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm

Second appear with set values. Configuration options: [Disabled] [Enabled]

Power On By External Modem [Disabled]

This allows either settings of [Enabled] or [Disabled] for powering up the computer

when the external modem receives a call while the computer is in Soft-off mode.

Configuration options: [Disabled] [Enabled]

Power On By PCI (E) Device [Disabled]

When set to [Enabled], this parameter allows you to wake the system through a PCI Express/

PCI card. This feature requires an ATX power supply that provides at least 1A on the +5VSB

lead. Configuration options: [Disabled] [Enabled]

Power On By PS/2 Keyboard [Disabled]

Allows you to use specific keys on the keyboard to turn on the system. This feature requires

an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options:

[Disabled] [Space Bar] [Ctrl-Esc] [Power Key]

Power On By PS/2 Mouse [Disabled]

When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on the

system. This feature requires an ATX power supply that provides at least 1A on the +5VSB

lead. Configuration options: [Disabled] [Enabled]

2.5.6

Hardware Monitor

CPU Temperature [xxxºC/xxxºF] or [Ignored]

MB Temperature [xxxºC/xxxºF] or [Ignored]

The onboard hardware monitor automatically detects and displays the motherboard and CPU

temperatures. Select

Ignored

if you do not wish to display the detected temperatures.

CPU/Chassis Fan Speed [xxxxRPM] or [Ignored]

The onboard hardware monitor automatically detects and displays the CPU/chassis fan

speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field

shows

N/A

. Select Ignored if you do not wish to display the detected speed.

CPU Q-Fan Control [Enabled]

Allows you to enable or disable the CPU Q-Fan function. Configuration options: [Disabled]

[Enabled]

Содержание P5G41T-M LX V2































































Результаты поиска

Содержание P5G41T-M LX V2

Отзывы:

Похожие инструкции для P5G41T-M LX V2

Бренды по названию

Популярные бренды

Asus P5G41T-M LX V2, Руководство пользователя

Результаты поиска

Содержание P5G41T-M LX V2

Отзывы:

Похожие инструкции для P5G41T-M LX V2

Бренды по названию

Популярные бренды