background image

ASUS P5G41T-M LE

2-21

2.8 

Exit menu

The Exit menu items allow you to load the optimal or failsafe default values for the BIOS 

items, and save or discard your changes to the BIOS items.

Pressing 

<Esc>

 does not immediately exit this menu. Select one of the options from this 

menu or 

<F10>

 from the legend bar to exit.

Exit system setup

after saving the

changes.

F10 key can be used

for this operation.

      Select Screen

      Select Item

Enter Go to Sub-screen

F1    General Help

F10   Save and Exit

ESC   Exit

Exit Options

Exit & Save Changes

Exit & Discard Changes

Discard Changes

Load Setup Defaults

BIOS SETUP UTILITY

Main    

 

Advanced     Power     Boot     Tools    

Exit

     Select Screen

     Select Item

+-   Change Option

F1   General Help

F10  Save and Exit

ESC  Exit

Exit system setup 

after saving the 

changes.

F10 key can be used 

for this operation.

Exit & Save Changes

Once you are finished making your selections, choose this option from the Exit menu to 

ensure the values you selected are saved to the CMOS RAM. An onboard backup battery 

sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this 

option, a confirmation window appears. Select 

OK

 to save changes and exit.

Exit & Discard Changes

Select this option only if you do not want to save the changes that you made to the Setup 

program. If you made changes to fields other than System Date, System Time, and 

Password, the BIOS asks for a confirmation before exiting.

Discard Changes

This option allows you to discard the selections you made and restore the previously saved 

values. After selecting this option, a confirmation appears. Select 

OK

 to discard any changes 

and load the previously saved values.

Load Setup Defaults 

This option allows you to load the default values for each of the parameters on the Setup 

menus. When you select this option or if you press 

<F5>

, a confirmation window appears. 

Select 

OK

 to load default values. Select 

Exit & Save Changes

 or make other changes 

before saving the values to the non-volatile RAM.

Содержание P5G41T-M LE



























































Отзывы: