background image

viii

About this guide

Audience

This guide provides general information about the ASUS P2-P5N9300/

 

P4-P5N9300 barebone system. This guide is intended for experienced users and 

integrators with hardware knowledge of personal computers.

How this guide is organized

This guide contains the following parts:

1.  Chapter 1: System introduction

This chapter gives a general description of ASUS P2-P5N9300/P4-P5N9300. 

The chapter lists the system features, including introduction on the front and 

rear panel, and internal components.

2.  Chapter 2: Starting up

This chapter helps you power up the system and install drivers and utilities 

from the support CD.

3.  Chapter 3: Motherboard information

This chapter gives information about the motherboard that comes with the 

system. This chapter includes the motherboard layout, jumper settings, and 

connector locations.

4.  Chapter 4: BIOS information

This chapter tells how to change system settings through the BIOS Setup 

menus and describes the BIOS parameters.

Lithium-Ion Battery Warning

CAUTION

: Danger of explosion if battery is incorrectly replaced. Replace 

only with the same or equivalent type recommended by the manufacturer. 

Dispose of used batteries according to the manufacturer’s instructions.

VORSICHT

: Explosionsgetahr bei unsachgemäßen Austausch der Batterie. 

Ersatz nur durch denselben oder einem vom Hersteller empfohlenem  

ähnljchen Typ. Entsorgung gebrauchter Batterien nach Angaben des 

Herstellers. 

LASER PRODUCT WARNING

CLASS 1 LASER PRODUCT

Содержание P2-P5N9300



















































































Отзывы: