Asus Maximus IV Extreme Скачать руководство пользователя страница 181

Страница: 181 / 186

ROG Maximus IV Extreme

5-5

5.2

NVIDIA

SLI™ technology

The motherboard supports the NVIDIA

SLI™ (Scalable Link Interface) technology

that allows you to install multi-graphics processing units (GPU) graphics cards.

Follow the installation procedures in this section.

5.2.1

Requirements

•

In SLI mode, you should have two identical SLI-ready graphics cards that are

NVIDIA

certified.

•

Ensure that your graphics card driver supports the NVIDIA SLI technology.

Download the latest driver from the NVIDIA website (www.nvidia.com).

•

Ensure that your power supply unit (PSU) can provide at least the minimum

power required by your system. See Chapter 2 for details.

5.2.2

Installing two SLI-ready graphics cards

The following pictures are for reference only. The graphics cards and the

motherboard layout may vary with models, but the installation steps remain the

same.

1. Prepare two SLI-ready graphics

cards.

2. Insert the two graphics card into the

PCIEX16 slots. If your motherboard

has more than two PCIEX16 slots,

refer to Chapter 2 in this user

manual for the locations of the

PCIEX16 slots recommended for

multi-graphics card installation.

3. Ensure that the cards are properly seated on the slots.

• We recommend that you install additional chassis fans for better thermal

environment.

• Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified

graphics card and supported 3D application list.

Содержание Maximus IV Extreme



























































































































































































Результаты поиска

Содержание Maximus IV Extreme

Отзывы:

Asus Maximus IV Extreme, Руководство пользователя, Страница: 181 / 186

Результаты поиска

Содержание Maximus IV Extreme

Отзывы: