Asus M3A79-T Deluxe - Motherboard - ATX Скачать руководство пользователя страница 157

Страница: 157 / 164

ASUS M3A79-T Deluxe

4-47

4.4.3

AMD

RAID configurations

This motherboard supports RAID 0, RAID 1, RAID 5 and RAID 10 configurations

for Serial ATA hard disks drives through the AMD SB750 chip.

Setting the RAID item in BIOS

You must set the RAID item in the BIOS Setup before you can create a RAID

set(s). To do this:
1. Install the internal Serial ATA hard disk drives to the SATA connectors labeled

SATA_1/2/3/4/5/6

2. Boot up your computer, and press <Del> during POST to enter the BIOS

setup.

3. In the Main Menu, go to Storage Configuration, and set the

OnChip SATA

Type

item to [RAID].

3. Press <F10> to save the changes and exit.

The RAID BIOS setup screens shown in this section are for reference only, and

may not exactly match the items on your screen.

4.4.2

Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance,

install identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID configuration:

1.  Install the SATA hard disks into the drive bays.
2.  Connect the SATA signal cables.
3.  Connect a SATA power cable to the power connector on each drive.

Содержание M3A79-T Deluxe - Motherboard - ATX





































































































































































Результаты поиска

Содержание M3A79-T Deluxe - Motherboard - ATX

Отзывы:

Asus M3A79-T Deluxe - Motherboard - ATX, Руководство пользователя, Страница: 157 / 164

Результаты поиска

Содержание M3A79-T Deluxe - Motherboard - ATX

Отзывы: