Asus LU700 Series Скачать руководство пользователя страница 18

Страница: 18 / 77

P18

Clinically used in secondary areas (including, but not limited to, surgery, rectum, vaginal,

etc.)

. It’s should be confirmed that the probe used is approved by the competent authorities’

aseptic probe sheath cover.

Warnings

(1) DO NOT immerse the probe into any liquid beyond the immersion level. Never immerse

the probe connector into any liquid.

(2) Do NOT use in a patient who would be harmed caused by applying ultrasound.

(3) DO NOT drop the probe or subject them to other types of mechanical shock or impact.

Degraded performance or damage such as cracks or chips in the housing may result.

(4) Do NOT modify this device without authorization of the ASUS.

(5) Do NOT use the probe with high frequency surgical equipment. Doing so may damage

the equipment.

(6) Do Not use the product close to strong electromagnetic field, electromagnetic wave and

magnetic environment. There is possibility of measurement errors or damage to the
product.

(7) When the device LU700 is charged with a mobile charging power supply, do NOT use it

to work for diagnostic.

(8) Do not allow the transducer to contact the patient if the temperature of the transducer is

higher than 43°C (109°F).

(9) Do not operate this system in the presence of flammable gases or anesthetics. Explosion

can result.

(10) Do not use if the face is cracked, chipped, or torn; the housing is damaged; or the cable

is abraded. Electric shock can result.

(11) Do Not charge the battery near a fire or heater.

(12)

Never attempt to open a transducer or a transducer connector.

All the contraindications and warning are well concerned by following the regulation of EN ISO
14971:2012 with related report.

Hardware

Purchases and Upgrades

•

The equipment has a lifetime of 300 battery charging cycle.

•

To order additional supplies and accessories, go to www.asus.com and contact Leltek.

Warranty

•

This equipment includes a one-year warranty. To purchase extended warranty
programs, go to www.asus.com and contact Leltek.

Содержание LU700 Series














































































Результаты поиска

Содержание LU700 Series

Отзывы:

Похожие инструкции для LU700 Series

Бренды по названию

Популярные бренды

Asus LU700 Series, Руководство пользователя

Результаты поиска

Содержание LU700 Series

Отзывы:

Похожие инструкции для LU700 Series

Бренды по названию

Популярные бренды