Asus J1800I-C Скачать руководство пользователя страница 17

Страница: 17 / 58

ASUS J1800I-C

1-9

1.7

Connectors

1.7.1

Rear panel connectors

PS/2 Keyboard / Mouse Combo port.

This port is for a PS/2 keyboard or mouse.

LAN (RJ-45) port.

This port allows Gigabit connection to a Local Area Network (LAN)

through a network hub. Refer to the table below for the LAN port LED indications.

LAN port LED indications

LAN port

Speed

LED

Activity Link

LED

Activity/Link LED Speed LED
Status

Description

Status

Description

OFF

No link

OFF

10Mbps connection

ORANGE

Linked

ORANGE 100Mbps connection

BLINKING

Data activity

GREEN

1Gbps connection

6 7

USB 3.0 port.

This 9-pin Universal Serial Bus (USB) ports is available for connecting

USB 3.0 devices.

•

DO NOT connect a keyboard / mouse to any USB 3.0 port when installing a Windows

operating system.

•

Due to USB 3.0 controller limitations, USB 3.0 devices can only be used under a

Windows

OS environment after installing the USB 3.0 driver.

•

USB 3.0 devices can be used for data storage only.

•

We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for a

faster and better performance from your USB 3.0 devices.

HDMI port.

This port is for a High-Definition Multimedia Interface (HDMI) connector,

and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected

content.

Содержание J1800I-C



























































Результаты поиска

Содержание J1800I-C

Отзывы:

Asus J1800I-C, Руководство пользователя, Страница: 17 / 58

Результаты поиска

Содержание J1800I-C

Отзывы: