Asus DS300 G2 Series, Руководство пользователя

Страница: 171 / 262

DS300f G2 Series User Manual
165
A
dding A
t
rAP
s
ink
To add a trap sink:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
Software Management
and press
Enter
.
3. Highlight
SNMP
and press
Enter
.
4. Highlight
Trap Sinks
and press
Enter
.
5. Highlight
Create New Trap Sink
and press
Enter
6. Highlight
Trap Sink IP address
and press the backspace key to erase the current value, then type the new
IP address in this field.
7. Highlight
Trap Filter
and press the spacebar to toggle through the severity levels.
See the Table below.
8. Press
Control-A
to save the Trap Sink.
Event Severity Levels
Level Description
Fatal Non-recoverable error or failure has occurred.
Critical Action is needed now and the implications of the condition are serious.
Major
Action is needed now.
Minor Action is needed but the condition is not a serious at this time.
Warning
User can decide whether or not action is required.
Information Information only, no action is required.
d
eleting A
t
rAP
s
ink
To delete a trap sink:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
Software Management
and press
Enter
.
3. Highlight
SNMP
and press
Enter
.
4. Highlight
Trap Sinks
and press
Enter
.
5. Highlight the trap sink you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
6. Highlight
Delete Marked Entries
and press
Enter
.
m
akInG
n
etSenD
S
ettInGS
(clu)
By default, Netsend service is set to Manual and its normal status is Stopped.
To make Netsend service settings:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
Software Management
and press
Enter
.
3. Highlight
Netsend
and press
Enter
.
4. Highlight
Startup Type
and press the spacebar to toggle between
Automatic
and
Manual
.
5. Press
Control-A
to save your settings.
To start, stop or restart the Netsend service, highlight
Start
,
Stop
, or
Restart
and press
Enter
.
m
anaGInG
n
etSenD
r
ecIPIentS
(clu)
ASUS DS300f G2’s Netsend service sends ASUS DS300f G2 subsystem events in the form of text messages to
your Host PC and other networked PCs.
n
etsend
r
equireMents
In order to use Netsend:
• NetSend must be running the ASUS DS300f G2
• You must provide the IP address for each recipient PC
• The Messenger service must be running on each recipient PC
If your Netsend and Messenger service settings are correct but the recipient PC does not receive event messages,
check the recipient PC’s Firewall settings. Refer to your OS documentation for more information.
A
dding
n
etsend reciPients
To add a Netsend recipient:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
Software Management
and press
Enter
.
3. Highlight
Netsend
and press
Enter
.
4. Highlight
Message Recipients
and press
Enter
.
5. Highlight
Create New Message Recipient
and press
Enter
.