Asus DS300 G2 Series, Руководство пользователя

Страница: 164 / 262

DS300f G2 Series User Manual
158
M
APPing A
lun
to An i
scsi i
nitiAtor or
t
Arget
To map a LUN to an iSCSI initiator or target:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
LUN Mapping
and press
Enter
.
3. Do one of the following actions:
• Highlight LUN Mapping: Initiators and press
Enter
. Then highlight an initiator and press
Enter
.
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value, then type the LUN you want to assign
to this target, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press
Control-AR
to restore the current LUN.
5. Press
Control-A
to save the LUN map.
e
DItInG a
lun m
aP
(clu)
Editing a LUN map is the action of assigning a logical drive or LUN to an initiator. By changing the assignment,
you change the initiator’s access.
To edit a LUN map:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
LUN Mapping
and press
Enter
.
3. Do one of the following actions:
• Highlight LUN Mapping: Initiators and press
Enter
. Then highlight an initiator and press
Enter
.
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value, then type the LUN you want to assign
to this initiator, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press
Control-AR
to restore the current LUN.
5. Press
Control-A
to save the LUN map.
D
eletInG a
lun m
aP
(clu)
Deleting a LUN map prevents the initiator from accessing the LUN while LUN masking is enabled.
To delete a LUN map:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
LUN Mapping
and press
Enter
.
3. Do one of the following actions:
• Highlight LUN Mapping: Initiators and press
Enter
. Then highlight an initiator and press
Enter
.
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value.
Leave the field blank.
5. Press
Control-A
to save the initiator, port, or target without a LUN map.
c
hanGInG the
a
ctIve
lun m
aPPInG
t
yPe
(clu)
For FC systems, you can set up an Initiator type LUN map.
For iSCSI systems, you can set up an Initiator type LUN map.
You can set up both LUN map types on the same subsystem but only one LUN map type can be active at a time.
To change the active LUN map type:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
LUN Mapping
and press
Enter
.
3. Highlight Active LUN Mapping Type and press the Spacebar to toggle between choices:
• FC subsystems, choose the Initiator option.
• iSCSI subsystems, choose the Initiator option.
4. Press
Control-A
to save your setting.