Asus DS300 G2 Series, Руководство пользователя, Страница: 163 / 262

DS300f G2 Series User Manual
157
D
eletInG an
I
nItIator
(clu)
Caution
If you delete an initiator, you delete the LUN map associated with that initiator.
Verify that the LUN map is no longer needed before deleting the initiator
To delete an initiator:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
LUN Mapping
and press
Enter
.
3. Highlight the initiator you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
4. Highlight
Delete Marked Initiators
and press
Enter
.
5. Press Y to confirm the deletion.
v
IewInG a
l
ISt of
lun m
aPS
(clu)
To view a list of LUN maps:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
LUN Mapping
and press
Enter
.
3. Do one of the following actions:
• Highlight LUN Mapping: Initiators and press
Enter
. Then highlight an initiator and press
Enter
.
The list of logical drives with corresponding LUN maps appears.
a
DDInG a
lun m
aP
(clu)
For FC & iSCSI systems, you can set up an Initiator LUN map.
You can set up the LUN map type on the same subsystem but only one LUN map type can be active at a time.
A maximum of 256 logical drives can be mapped to an FC initiator or to an iSCSI initiator.
To assign a LUN to an FC or iSCSI initiator, add the initiator first. See Adding an Initiator (CLU).
LUN mapping must be enabled in order to map a LUN. See Enabling LUN Mapping (CLU).
M
APPing A
lun
to An
fc i
nitiAtor
To map a LUN to an FC initiator:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
LUN Mapping
and press
Enter
.
3. Do the following actions:
• Highlight LUN Mapping: Initiators and press
Enter
. Then highlight an initiator and press
Enter
.
A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value, then type the LUN you want to assign
to this initiator, from 0 to 255.
Each logical drive can have only one LUN and must have a unique LUN.
If you make a error, press
Control-AR
to restore the current LUN.
5. Press
Control-A
to save the LUN map.