Asus Crosshair V Formula-Z Скачать руководство пользователя страница 170

Страница: 170 / 190

5-6

Chapter 5: RAID support

Chapter 5

5.2

Creating a RAID driver disk

A floppy disk with the RAID driver is required when installing a Windows

operating system

on a hard disk drive that is included in a RAID set.

•

The motherboard does not provide a floppy drive connector. You have to use a USB

floppy disk drive when creating a SATA RAID driver disk.

•

Windows

XP may not recognize the USB floppy disk drive due to Windows

limitation. To work around this OS limitation, refer to section

5.2.4 Using a USB

floppy disk drive

5.2.1

Creating a RAID driver disk without entering the OS

To create a RAID driver disk without entering the OS:

Boot your computer.

Press <Del> during POST to enter the BIOS setup utility.

3. Set the optical drive as the primary boot device.
4. Insert the support DVD into the optical drive.
5.

Save changes and exit BIOS.

6.   When the Make Disk menu appears, press <1> to create a RAID driver disk.
7.   Insert a formatted floppy disk into the USB floppy disk drive, then press <Enter>.
8.   Follow the succeeding screen instructions to complete the process.

5.2.2

Creating a RAID driver disk in Windows

To create a RAID driver disk in Windows

Start Windows

2.   Plug the USB floppy disk drive and insert a floppy disk.
3.   Place the motherboard support DVD into the optical drive.
4.   Go to the

Go to the

Make Disk

menu, and then click

AMD AHCI/RAID 32/64bit xxxx Driver

create a RAID driver disk.

5. Select

USB floppy disk drive

as the destination disk.

6. Follow the succeeding screen instructions to complete the process.

Write-protect the floppy disk to avoid a computer virus infection.

Содержание Crosshair V Formula-Z































































































































































































Результаты поиска

Содержание Crosshair V Formula-Z

Отзывы:

Бренды по названию

Популярные бренды

Asus Crosshair V Formula-Z, Руководство пользователя

Результаты поиска

Содержание Crosshair V Formula-Z

Отзывы:

Бренды по названию

Популярные бренды