Asus Crosshair II Formula Скачать руководство пользователя страница 178

Страница: 178 / 186

6-10

Chapter 6: NVIDIA

SLI™ technology support

6.2.2

Enabling GeForce

Boost and HybridPower™

• Before enabling GeForce Boost and HybridPower, make sure that you have

installed a dGPU recommended for GeForce Boost on your motherboard.

• Make sure that you have connected your display to the dGPU. Otherwise, the

motherboard cannot detect your display and no image appears.

To enable GeForce Boost

1. Turn on the system and press <Del> during the Power-On Self-Test (POST)

Turn on the system and press <Del> during the Power-On Self-Test (POST)

to enter the BIOS Setup Utility.

2. Go to

Advanced > Onboard Device Configuration

and set the

Hybrid Support

item to �Enabled��. See section

4.5.3 Onboard Device

Configuration

for details.

• The

Hybrid Support

item appears only when a minimum of 2GB memory

is detected.

• The

Hybrid Support

item becomes user�configurable only when a dGPU is

detected. Make sure that your dGPU is properly installed.

Select Menu

Item Specific Help

Phoenix-AwardBIOS CMOS Setup Utility

Advanced

Onboard Device Configuration

Hybrid Support

Enabled

iGPU Frame Buffer Control [Auto]

x Frame Buffer Size

128M

Onboard GPU

[Auto]

Primary Display Adapter [PCI-E]

HD Audio

[Enabled]

Front Panel Support Type [HD Audio]

HDMI Audio

[Auto]

3. Save your changes and Exit Setup.
4. Turn off the system, disconnect your display from the dGPU, and connect

your display to the onboard VGA port at the rear panel.

5. Turn on the system. From the Windows

desktop, go to

Start > Control

Panel > User Accounts and Family Safety

to turn off

User Account

Control

6. Place the motherboard support DVD into the optical drive, and go to the

Drivers

menu to install the

NVIDIA Chipset Driver Program

7. Restart the system.

8. If the driver is correctly installed, you will find

the Hybrid SLI icon on the taskbar.

The Hybrid SLI icon indicates that the system is

in Performance mode and that GeForce Boost

is enabled. The onboard GPU will share the

rendering load with the dGPU and boost the

performance of the dGPU.

Содержание Crosshair II Formula



























































































































































































Результаты поиска

Содержание Crosshair II Formula

Отзывы:

Asus Crosshair II Formula, Руководство пользователя, Страница: 178 / 186

Результаты поиска

Содержание Crosshair II Formula

Отзывы: