TrojanTwo-Compact User Guide v3.8
Page | 96
15
Preparing the T2-C press for transportation
15.1
Removing the printhead
1.
Press ‘Release printhead’ button at TrojanTwo tab -> Maintenance menu.
2.
Release printhead process is removing the ink form the printhead and from the ink tubes around
the printhead and pumping all the ink from this area back to the reservoir ink tanks.
3.
When release printhead process is finished, the blue printhead latch will be released and can be
opened up all the way (a.), then printhead has to be pulled towards the latch (b.) and finally it is
free to lift out from the machine (c.).
4.
Only grab the printhead by the handles and nowhere else.
5.
For transportation, install the blue rubber dock protector caps to avoid ink leaking via the revolver
holes.
c.
c.
b.
b.
a.
