TrojanTwo-Compact User Guide v3.8
Page | 70
Deleting the selected print job.
(Same as in job library).
11.3.6
Diagnostics menu
Information about software, firmware, serial numbers and total label counter.
Temperature:
Adjusting ink temperature to room temperature for the best print quality. The
average temperature of the room where the T2-C press is set up displayed in temperature field
based on the feedback of the built in temperature sensor. Heating up the ink right before printing
will be adjusted to environmental temperature. This field is filled up automatically based on the
temperature sensor but can be overwritten by the user.
NOTE:
User defined temperature value remains valid only until the next reboot.
Color Bars:
Standard color bars for checking printhead nozzles, mixes CMYK colors (A4 size).
Ink Channels:
Printing a color bar with each ink channel, no ink mixing (CMYK – A4 size).
IMPORTANT:
The ink channels test plot is the best diagnostic tool to verify the current state of the
printhead nozzles. If there is any blocked/dehydrated nozzle or other nozzle defect, then this can be
clearly seen on this diagnostic page.
