TrojanTwo-Compact User Guide v3.8
Page | 36
IMPORTANT:
Because of inter-page actions the printed labels have to have:
Minimum 3 mm gap at 6IPS mode (recommended gap is 4mm).
Minimum 3 mm gap at 12IPS mode (recommended gap is 4mm).
Maximum gap size is 65 mm
IMPORTANT:
Setting label gap outside the minimum and maximum range can result to label skipping,
missed TOF error message or enormously high label gaps.
8.3
Blackmark printing mode
Blackmark label material format is when the label material has pre-printed registration marks, so
called ‘blackmarks’ on the label material (can be on front or back side of the label roll).
To set the T2-C press to Blackmark printing mode go to
TrojanTwo tab ->
Media settings menu
and
select the
‘Blackmark’
button at TOF mode field, then press the
‘Save & apply’
button to apply the
setting changes.
NOTE:
TOF = Top of Form, the top of form algorithm describes how to detect the top of the next
label.
Example to blackmark label material. Registration marks can be on front or back side of the label roll.
Save & Apply
