AstroNova QuickLabel QL-850 Скачать руководство пользователя страница 19

Страница: 19 / 127

Getting Started

QL-850 User Guide

•

Your PC is connected to the printer via the network and the driver software has been
installed for network printing.

The QL-850 Toolbox application allows you to enable/disable DHCP and change the IP
address of the printer.

Note: Some QL-850 Toolbox features are not supported. Use only the features described in
this procedure.

Open the QL-850 Toolbox application from a PC connected to the printer via USB.

From the Windows Start Menu, choose

Start > All Programs > QuickLabel QL-850 >

Toolbox

A web browser will open and display the QL-850 Toolbox application.

Choose the

Diagnostics

link to display the Diagnostics information.

The IP address for the printer is displayed on this page. Note the IP address for reference
purposes.

If the IP address does not appear, or you would like to change the IP address, choose
the

Network Config

link. Network configuration information will be displayed.

•

If you would like to automatically assign a new IP address based on DHCP, select
the

dhcp

and

autoip

options. Then choose

Submit

•

If you would like to assign a specific IP address, ensure the

dhcp

and

autoip

options are not checked. Enter the new IP address in the

ip_address

field and

choose

Submit

Choose the

Diagnostics

link to return to the Diagnostics information. Confirm the

network settings before exiting the application.

Close the web browser to exit the QL-850 Toolbox application.

Using the After Shipping Wizard

After installing the driver, the QL-850 Maintenance Utility will be available for use. You will use
the After Shipping wizard in this utility to prepare the maintenance roller, install ink cartridges,
and install the printhead.

Launch the QL-850 Maintenance Utility.

From the Windows Start Menu, choose

Start > All Programs > QuickLabel QL-850 >

QL-850 Maintenance Utility

. A language and printer prompt will open.

Select a display language and the QL-850 printer you want to connect to. Choose

Choose the

Cleaning

tab.

Choose

After Shipping

. Follow the on-screen instructions to complete this procedure.

This wizard will guide you through the following actions.

•

Preparing the Maintenance Roller -

See “Preparing the Maintenance Roller” on

page 20.

•

Installing Ink Cartridges -

See “Installing Ink Cartridges” on page 21.

•

Installing the Printhead -

See “Installing the Printhead” on page 22.

Содержание QuickLabel QL-850
































































































































Результаты поиска

Содержание QuickLabel QL-850

Отзывы:

Похожие инструкции для QuickLabel QL-850

Бренды по названию

Популярные бренды

AstroNova QuickLabel QL-850, Руководство пользователя

Результаты поиска

Содержание QuickLabel QL-850

Отзывы:

Похожие инструкции для QuickLabel QL-850

Бренды по названию

Популярные бренды