External Unwinder
QL-850 User Guide
111
Unwinding Labels with the External Unwinder
The unwinder automatically unwinds media into the QL-850 for printing. This option is used
when feeding rolls over eight inches in diameter.
Note: Do not turn the unwinder mandrel by hand to unwind the media. Turning the mandrel by
hand can result in unwinder damage.
1.
Enable
External Unwind Mode
in the
Print Settings
tab of the QL-850 Maintenance
Utility. Refer to the QL-850 Driver Help for details.
2.
Ensure the power switch [3] on the unwinder is in the off position.
3.
Turn the thumb screw [6] counterclockwise to loosen and remove the removable roll
support arm [7].
4.
Turn the unwinder mandrel adjustment knob [4] counterclockwise to loosen the mandrel.
5.
Remove the outer flange [2] from the mandrel.
6.
Load a roll of labels on the mandrel. The media should unwind over the top of the roll
toward the printer. Ensure the side of the roll contacts the inner flange [1].
7.
Reinstall the outer flange [2] and then turn the mandrel adjustment knob [4] clockwise to
tighten the mandrel.
8.
Install the removable roll support arm [7]. Then tighten the thumb screw [6] to lock it into
position.
[1]
[2]
[3]
[4] [7]
[5]
[6]
Содержание QuickLabel QL-850
Страница 1: ...U S E R G U I D E...
Страница 127: ...Index QL 850 User Guide 127 W Wing Nut 31...
