manualshive.com logo in svg

ASTRO VG-870B, Инструкция по эксплуатации

Поделиться
Скачать
ASTRO VG-870B Скачать руководство пользователя страница 198

 

 

180 

 

<SCART setting parameters> 

This sets On or Off for each channel. 
The same settings as the ones described in “4.1.1 Setting the output 
interfaces to ON or OFF” can also be established. 
0 

Off 

No output. 

(1) 

Output 1ch (0/1) 
Output 2ch (0/1) 

1 

On 

Output. 

This sets the format of the video signals which are output from the SCART 
connector. 
0 

COMPOSITE 

Composite signals are output. 

1 

Y/C 

Y/C signals are output. 

(2) 

Output Select (0-2) 

2 

RGB 

RGB signals are output. 

This sets the video status signal which is output from the SCART connector.
0 

Auto 

The setting accords with the program setting. 

1 

4:3 

4:3 (identified voltage: 12 V (9.5 to 12.0 V)) 

2 

16:9 

16:9 (identified voltage: 5 V (4.5 to 7.0 V)) 

(3) 

Video Status (0-3) 

3 

No Signal 

No output. (identified voltage: 0 V (0.0 to 2.0 V))

This sets the RGB status signal which is output from the SCART connector. 
0 

Auto 

The signal is set automatically by 

Output 

Select

. 

1 

VBS 

Composite or Y/C signals   
(identified voltage: 0 V) 

2 

RGB 

RGB (identified voltage: 5 V) 

(4) 

RGB Status (0-3) 

3 

Fast Blanking 

The fast blanking signal is output. 

This sets the output range of the fast blanking signal. 

H 

The horizontal output range is set as a percentage of H-Disp. 
Setting range: 

0% to 100%

 

(5) 

Fast Blanking Area 

V 

The vertical output range is set as a percentage of V-Disp. 
Setting range: 

0% to 100%

 

This sets on or off for each channel. 
0 

OFF 

No output. 

(6) 

Audio Out1ch (0/1) 

1 

ON 

Output. 

(7) 

Audio Out2ch (0/1) 

This setting is the same as for the Audio Out1ch setting. 

4.11.3 

Functions available with TV standard signals 

 

Macrovision, closed caption, V-Chip, Teletext, WSS and CGMS-A/ID-1 can be multiplexed with the 
composite signals and Y signal. 

For details on the setting procedure, refer to “5.

 

FUNCTIONS AVAILABLE WITH TV STANDARD 

SIGNALS.” 

4.11.4 Filter 

settings 

 

For further details on the setting procedure, refer to “4.8.2 Composite signal filter settings.” 

Содержание VG-870B




































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды