ASTRO FHP2, Руководство по эксплуатации

Страница: 30 / 34

Fiber Scope user manual (release 1.0)
3
1 Warning
Before operating the device:
Read this operating manual carefully! It contains important information about installation,
ambient conditions and maintenance of the device. Keep this operating manual for future use
and for handover in the event of a change of owner or operator. A PDF version of this
manual can be downloaded on the ASTRO website (there may be a more recent version).
The ASTRO company confirms that the information in this manual was correct at the time of
printing, but it reserves the right to make changes to the specifications, the
operation of the device and the operating manual without prior notice.
Important safety notice:
The device does not emit optical power, however can be
connected to fibre optic connectors to which optical power is
applied. Before connecting the optical connector to the fibre
microscope, all optical power in the supply cable must always,
without exception, be switched off and the system secured
against unintentional activation of laser radiation. Laser light,
especially when optically bundled, can damage the retina of the
eye and thereby permanently damage vision!
Improper use of optical fibres with visible and non-visible laser
radiation can cause long-term damage to health, as well as damage
to the device.
Never look into optical fibres with the naked eye or by means of an
optical inspection device without making sure that the optical fibre
for inspection emits absolutely no radiation.
The visible or non-visible light can cause a loss of vision in the event
of improper use.
High optical powers can cause burn marks on the fibre-optic contact
surfaces.
Under no circumstances insert or unplug high optical powers
(benchmark approx. > +16.0 dBm) into or from the optical receiver
during operation. Switch off the laser source beforehand.
Always switch off the transmission power beforehand, and ensure
there is no power flowing through the glass fibres. All other safety
precautions that apply to the use of high optical powers must be
strictly complied with.
Only personnel trained in the use of laser technology should be
assigned to work to prevent any damage to health due to non-
observance.
DRAFT VERSION