Fireplace Model MONTE - Approved Venting Components manufactured
by Security Chimneys International™ only.
• 6” diameter chimney
- AC (air cooled), Secure Temp
®
ASHT+ (or Nova Temp
®
) and Secure Temp
S-2100+ (or Nova Temp
).
•
6” diameter chimney for relining masonry chimneys
- Tubinox
®
chimney (or
Projet
®
SS), 6” diameter with adaptor for installation in a masonry chimney.
Fireplace Model MONTE - Approved Venting Components manufactured
by DuraVent
®
only.
• 6” diameter chimney
- M&G DuraVent model DuraTech
®
DTC
NOTES:
Nova Temp is equivalent to Secure Temp S-2100+
DuraTech
®
DTC and Nova Temp are equivalent to Secure Temp ASHT+
This appliance is equipped with the ASHT Chimney Adaptor. When other
chimney is used, a chimney adaptor for that chimney will be required.
Chimney Adaptor (S-2100+ / ) for CANADA ONLY - If you want to
install a S-2100+ / chimney, an adaptor is available (6UCA).
AC Chimney is NOT recommended at elevations above 4,000 feet or in cold
climates (climates where temperatures will fall below 32° F / 0° C). When
using AC chimney, an AC6SB starter section must be used before installing
an elbow. When an offset is needed immediately off the top of the fi replace,
an elbow starter section, AC6SB30, is available.
Secure Temp
ASHT 1” High Temp. Insulated Stainless Steel Chimney
6” I.D. and 8” O.D., Double-Wall Stainl. Steel, Listed to
CAN/UCL-S604, UL-103HT and CAN/ULC S629
Description
Part/Cat. No.
Lengths and Misc. Chimney Components
8” length, 6” Dia.
6L8
12” length, 6” Dia.
6L12
18” length, 6” Dia.
6L18
24” length, 6” Dia.
6L24
36” length, 6” Dia.
6L36
48” length, 6” Dia.
6L48
Adjustable Length 12”, 6” Dia.
6LA
15º elbow, 6” Dia.
6E15
30º elbow, 6” Dia.
6E30
Rain Termination Cap, 6” Dia.
6CC
Spark Arrester Screen (universal spark arrester band)
PE
Wall Band
BM
Supports
Offset Support
SO
Roof Support
ST
Roof Brace
BS2
Firestops
Firestop
6BF
Radiation Shield
6RS
Insulated Attic Radiation Shield
6RSA2
Insulated Wall Radiation Shield
6RSM
Insulated Wall Radiation Shield, 30º
6RSMI30
Uninsulated Wall Radiation Shield, 30º
6RSM30
Attic Radiation Shield
ACRSA
Roof Flashings
Flat Roof Flashing
6FR
1/12 - 7/12 (5º - 30º)
6FAR
8/12 - 12/12 (30º - 45º)
6FBR
Storm Collar
6FC
DuraTech DTC 1” High Temp. Insulated Stainless Steel Chimney
6” I.D. and 8” O.D., Double-Wall Stainl. Steel, Listed to
CAN/UCL-S604, UL-103HT and CAN/ULC S629
Description
Part/Cat. No.
Lengths and Misc. Chimney Components
8” length, 6” Dia.
6DTC-08SS
12” length, 6” Dia.
6DTC-12SS
18” length, 6” Dia.
6DTC-18SS
24” length, 6” Dia.
6DTC-24SS
36” length, 6” Dia.
6DTC-36SS
48” length, 6” Dia.
6DTC-48SS
Adjustable Length 12”, 6” Dia.
6DTC-12TASS
15º elbow, 6” Dia.
6DTC-E15SS
30º elbow, 6” Dia.
6DTC-E30SS
Rain Termination Cap, 6” Dia.
6DTC-VC
Spark Arrester Screen (universal spark arrester band)
DTC-SA
Wall Band
DTC-WSU
Supports
Offset Support
DTC-RESU
Roof Support
DTC-RS
Roof Brace
DTC-XRB
Firestops
Firestop
6DTC-FS
Radiation Shield
6DTC-FRS
Insulated Attic Radiation Shield
6DTC-ISI
Insulated Wall Radiation Shield
6DTC-WTI
Insulated Wall Radiation Shield, 30º
6DTC-WRSI30
Uninsulated Wall Radiation Shield, 30º
6DTC-WRSI45
Attic Radiation Shield
6DTC-ISIA
Roof Flashings
Flat Roof Flashing
6DTC-FF
1/12 - 7/12 (5º - 30º)
6DTC-F7
8/12 - 12/12 (30º - 45º)
6DTC-F12
Storm Collar
6DTC-SC
SECURITY CHIMNEYS™ AND DURAVENT
®
- PARTS AND COMPONENTS LISTS
The components listed below must be ordered from Security Chimneys International™ or DuraVent
®
. Contact your Security
Chimneys or DuraVent Distributor or Dealer for ordering information.
450-973-9999
1-800-361-4909 (USA)
1-800-667-3387 (Canada)
1-800-835-4429
Security Chimneys International Limited
2125 Monterey, Laval, Quebec
Canada, H7L 3T6
securitychimneys.com
M&G DuraVent
877 Cotting Court, Vacaville,
California, 95688
duravent.com
23