2
INSTRUCTION MANUAL
In- Ground Housing Unit
IMPORTANT: The instruction manual that you are holding in your
hands contains important information about the safety measures to
adopt during installation, start up and maintenance. Thus, it is
extremely important that both the installer and the user read the
instructions before beginning setup.
ATTENTION !!
Anyone working on the installation must have the required qualifications for this type
of work.
Avoid contact with electrical voltage.
The normatives in force for accident prevention must be followed.
IEC standards 3647702 must be complied with: ELECTRICAL INSTALLATIONS OF
BUILDINGS. SPECIAL INSTALLATIONS. SWIMMING POOLS.
Any maintenance operation or part replacement must be done with the SPA
disconnected from the mains.
Do not handle the equipment with wet feet.
This equipment CANNOT BE CONNECTED TO A REGULAR PLUG. This equipment
REQUIRES PROPER ELECTRICAL INSTALLATION. This must be done by a specialist,
following all the normatives on electrical safety in force in each country.
The supply to the unit must ALWAYS BE PROTECTED BY A HIGHLY-SENSITIVE
DIFFERENTIAL.
An EARTHING CONNECTION is required.
Use a SECTION CABLE with the appropriate power for the unit and for the distance to
the control panel.
Use a lock or padlock so that children or other unauthorised persons cannot access the
interior of the unit.
ALWAYS STOP THE PUMP BEFORE CHANGING THE POSITION OF THE SELECTOR VALVE.
Do not open the cover of the spa when it may be caught by a current or gust of wind.
The manufacturer is exempt from all liability due to improper assembly, installation,
start up or any changes or incorporations of any non-authorised electrical components.
