S I G N A T U R E
38
DO
DO NOT
Transport and
warehouse
Verify the state of the packaging and
accompanying information about
stacking.
Always transport inside the box.
Do not leave the box outdoors or in very
humid warehouses.
Installation
Assembly or manipulation must be
done by qualified staff, and always
according to the current rules of ac-
cident prevention and electrical instal-
lations.
Electrical connections must be strong
in order to avoid false contacts and
overheating.
Install the unit in a well-ventilated
place and try to protect ventilation
holes from any element which can
block it.
The AstralPool Chlore Elite electrolysis
systems work 30 V AC / 50 Hz. Do not
change the power supply to operate with
another voltage.
Do not place the unit near inflammable
materials.
The AstralPool Chlore Elite electrolysis
systems are provided with an IP4 pro-
tection level. They must not be installed in
places that can be flooded.
Start-up
Verify that the other equipments in-
stalled are compatible with salty wa-
ter.
Use only the spares supplied by As-
tralPool.
Do not use salt with additives (iodized
salt).
Do not installation or replacement of any
component without turning off the power
supply.
Operation
Verify that the ph and ORP sensors
are always submerged, even when
the recirculation pump is off.
Periodic manual controls of the chlo-
rine, pH and salinity levels, adjusting
them if necessary.
Do not operate at pH higher than 7.6.
Do not scrape or sweep the cell or the
electrodes.
Do not operate for a long time at salinities
lower than 3 g./l.
Regular use of copper based algaecides,
because its deposition can damage the
sensors.
We reserve the right to change all or some of the characteristics of our products or also the
content of this document without notice.
10. “DO AND DO NOT” table
