Astralpool 32505 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 56

background image

OPTIMA / MAYA SERIES · HEAT PUMP AIR/WATER

© FLUIDRA 2019 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.

Pag: 6

ENGLISH

2.

SEGURITY

2.1

RESPONSABILITY OF HOLDER

The owner is the person, people or entity that operates the AIRPOOL series machines for a
commercial or economic use, therefore assumes the legal liability to protect the final user of
the instalations, the operator/s of the machine and any third parties involved in the operation
of this machine.

In conjunction with the security measures included in this manual, the owner must respect the
following:

•

The owner must ensure that all the people in charge of the installation, operation,

technical servicing, maintenance and cleaning staff have been instructed concerning

the unit security measures, thus interacting with the machine in a safe way and

understanding the hazards involved.

•

The owner must ensure that all the people that interact with this equipment have read

and understood these instructions. In addition, the owner must train and inform the

staff periodically.

•

The owner must provide the staff adecuate protection gear to interact with the unit.

The owner is also responsible for ensuring that the machine is always in perfect condition.
Therefore, the following will apply:

•

The owner must ensure that maintenance intervals described in these instructions are

met.

•

The owner must regularly inspect all safety devices in terms of their operational

capability and integrity.

2.2

REFRIGERANT CIRCUIT

This machine contains a mechanical refrigeration system. The owner must ensure that the
people in charge of the operation, management and maintenance of the unit are subject
matter experts. Additionally the owner must ensure that these people comply with the
regulations of the European Union, as well as the technical and legal requirements of the
region or country.

REGULATION (EU) No 517/2014 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16
April 2014 on fluorinated greenhouse gases and repealing Regulation (EC) No 842/2006.

http://eur-lex.europa.eu/legal-content/ES/TXT/HTML/?uri=CELEX:32014R0517&from=EN

«
...
4
5
6
7
8
...
»

Содержание 32505

























































Отзывы:

Нет отзывов

Похожие инструкции для 32505

Бренд: Calpeda Страницы: 44

Бренд: Calpeda Страницы: 64

Бренд: Calpeda Страницы: 32

Бренд: salmson Страницы: 49

Бренд: Gabarron Страницы: 8

Бренд: KEKAI Страницы: 12

Бренд: Zibro Страницы: 34

Бренд: Raymarine Страницы: 24

SunCentric Series

Бренд: Dankoff Solar Страницы: 11

Nessie Plug&Spray NPS 1CS

Бренд: Danfoss Страницы: 12

Бренд: BLACKMER Страницы: 24

Бренд: Mr. Heater Страницы: 7

Бренд: STAR Water Systems Страницы: 8

Бренд: IBAIONDO Страницы: 7

Бренд: Danner Страницы: 2

Бренд: T.I.P. Страницы: 136

Бренд: Warmtec Страницы: 60

Бренд: Zodiac Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды