Aston Global Orbitus SEN980, Инструкция по установке и эксплуатации

Страница: 14 / 23

Install the Door Threshold
4
M4X40
SCREW PACK
(3)
The Door Threshold is used to prevent water from seeping out while bathing. Install
the threshold according to these instructions.
1. Position the door threshold (10) to shower base by aligning in door opening with
fixed glass (3). Mark the threshold end cap (11) mounting hole locations. See
figure 1
NOTE: If your surface is prone to cracking or chipping then it is recommended
that you pilot drill first using a smaller drill bit, and then step up to the final
size.
2. Using the appropriate drill bit for your base surface drill the hole locations with a
5/16" diameter drill bit and insert wall anchor into drilled holes. Repeat for the
other side. See figure 2.
13