3
PREFACE
The CONVEX series underwater lights are
designed to use the latest LED lighting
technology.
The thru-hull designed casings enable very
simple installation on the hull without making
any bigger holes through the hull under water
line.
All the models are available in aluminium
bronze casings. The lighting are available in
white, blue and green colors. All the models
are designed with 6 power LEDs and suitable
power supply units.
FEATURES
Aluminium Bronze Casing
6 Power LEDs Design
White, Blue or Green Lighting
Tempered Glass Optical Window
High-Efficiency
Lens
Low Power Consumption
Over-Temperature
Protection
Simple
Installation
Remote Control (optional)
PRECAUTIONS
The underwater light has to be installed and
used in accordance with the instructions of
this manual only.
The power supply has to be disconnected
before installation.
The underwater light is recomended to be
installed around 0.2 m below the waterline
for the best illumination and to avoid over-
heating.
Do not try to install or remove the
underwater light while the vessel is in the
water.
The optical window has to be cleaned by a
soft brush or cloth. Avoid using any
abrasive or chemical cleaner on the optical
window.
Avoid installing the power supply unit in
extremely hot places and near appliances
generating strong magnetic fields.
Do turn power off immediately and refer
servicing to qualified service personnel if
the underwater light does not operate
normally following the operating
instructions.
