AST System ASTmidi Скачать руководство пользователя страница 9

Страница: 9 / 32

www.astsystem.pl

Work with the driver

The ASTmidi / ASTmidi GPS driver for factory settings is ready for operation. After connecting the power supply, driver

outputs will be switched on at 15 minutes, and switched off at sunrise -15 minutes. Sunrise and sunset times

for factory settings are for the city of Warsaw. It is possible to sell the driver with programmed different location for

factory settings.

All parameters of the driver are subject to configuration. The AST mobile application is used to change them. In the

following sections it will be explained how to configure the driver using the ASTmobile application.

5.1 Establishing a connection to the driver using ASTmobile application

Assuming that you have an application installed on your phone, in order to establish a connection with the driver you

should press the icon

to launch the AST mobile application. After a short time, the screen for selecting the

application operating mode will be displayed, see the figure below.

Select "Online drivers". This will bring up a window with a list of available ASTmidi drivers (the driver search time can

take up to 60 seconds, but it usually takes up to a few seconds).

Содержание ASTmidi

































Результаты поиска

Содержание ASTmidi

Отзывы:

Бренды по названию

Популярные бренды

AST System ASTmidi, Руководство пользователя

Результаты поиска

Содержание ASTmidi

Отзывы:

Бренды по названию

Популярные бренды