27
5.9
Exceptions
Up to 20 switching exceptions can be entered in the ASTmidi driver. The exception for ASTmidi driver should be
understood as a set of switch-on intervals that will be used for a specific date. Exceptions that are entered into the
driver can be seen from the ASTmobile application - "Exceptions" screen, figure below.
The exception, which is beyond the date of occurrence is marked as "Exception expired”.
You can perform three operations on exceptions:
Add exception – in order to do so, press the "Add exception" button to open a dialog box where you can
specify exception parameters such as:
1.
1. Specify the outputs with which the exception is associated.
2.
2. Specify the date of occurrence of the exception.
3.
3. Specify switch-on intervals – switch-on intervals are defined in the same way as switch-on intervals for
outputs A, B and C.
The view of the Add Exception window is shown in the figure below.
