AST System ASTmidi Скачать руководство пользователя страница 17

Страница: 17 / 32

www.astsystem.pl

| [email protected]



24-hour day from 00:00 to 00:00:00 - selecting this item is recommended when most of the activities related

to switching intervals will take place during the day. If this item is selected, the switching interval must not

pass through 00:00:00.



Lighting day from 12:00 to 12:00 – selecting this item is recommended when most of the activities related to

switching intervals will take place in the night. If this item is selected, the switching interval must not pass

through 12 noon.

For factory settings the driver operates according to the lighting day.

For the lighting day (factory settings) T1 for outputs A, B and C is set as follows: T1 start: Astro and T1 stop: Astro, what

means that the outputs will be switched on at - adjustment time and switched off at sunrise.

After selecting a specific day, press the "Set" button to save the selection.

5.6.2

Correction mode

When the ASTmidi driver is used for lighting purposes and you use astronomical switch-on and switch-off times - these

times can be adjusted by means of corrections. In the driver three correction modes have been implemented:



Summer-winter - selecting this item will enable the correction of astronomical switch-on and switch-off times

independently in summer and winter time.



Quarterly - selecting this item will enable the correction of astronomical switch-on and switching-off times

independently in quarters I, II, III, IV.



Monthly - selecting this item will enable the correction of astronomical switch-on and switching-off times

independently in each month.

In order to change the correction mode, on the "Output A, B or C" screen select "Correction mode", what will display

a dialog box to perform this operation, see figure below.

Содержание ASTmidi

































Результаты поиска

Содержание ASTmidi

Отзывы:

Бренды по названию

Популярные бренды

AST System ASTmidi, Руководство пользователя

Результаты поиска

Содержание ASTmidi

Отзывы:

Бренды по названию

Популярные бренды