5
..
CLIQ™ Go Locking Systems
43
Figure 8. Blocking a Key in Three Steps
1)
Create blocking task in the system and transfer it to an updater key (K2).
a)
Select the key (K1) to block in the system.
b)
Click
Block key
.
Confirmation dialogue is displayed.
c)
Select a key used as the updater key.
d)
Click
Confirm
.
WARNING!
The blocked key still has access until cylinders are updated.
.
.
e)
Insert the updater key into the programming device to transfer the blocking
task in the to key.
If the updater key is Connect key, start CLIQ™ Connect app to update the
key via Bluetooth.
...
...
2)
Block every cylinder with the updater key (K2).
a)
Go to the cylinders with the updater key.
b)
Insert the updater key into every cylinder.
The blocking task carries out in the cylinders to block the lost or stolen key.
...
...
3)
Report the task’s completion to the system.
a)
Go back to the system.
b)
Connect the updater key (K2) to the system via the programming device.
If the updater key is Connect key, start CLIQ™ Connect app to connect the
key to the system.
Information how the blocking task is carried out is reported back to the
system.
c)
It is recommended to check if the key (K1) is blocked from all cylinders by
selecting
Keys
.
Содержание Zi IKON CLIQ Go
Страница 1: ...CLIQ Go Reseller Guide 2020 02 10 The global leader in door opening solutions ...
Страница 53: ...6 Appendix 53 ...
Страница 54: ......
