7
An ASSA ABLOY Group brand
P/N AYRD210-INST-FUL Rev E
6. Attach cable assembly connector to the inside
escutcheon PC board by lining up notches on top of
cable connector to slots on PCB connector (Fig. 6B).
Figure 6B
Figure 6A
CAUTION
:
Position and bend cable, using care when assembling
to ensure that the cable lies against the back recessed
area of the inside escutcheon.
Use the cable hook (Note label on circuit board) as
shown in Figures 6A & 6B to prevent binding when
installing the escutcheon over the mounting plate.
NOTE
: Connector should be pressed in firmly using
thumbs until completely seated.
Proper position is indicated by arrows on PCB
as in Figures 6A, 6B and 6C.
Route cable
as indicated -
do not cover
hole
Cable Hook
(Harness Clip)
Label
Figure 6C
