PARALLEL ARM Installation
Closer Mounted On Push Side Of Door
Parallel arm installation to 140° opening.
5-5/8
(143)
1-7/8
(48)
15/16
(24)
Parallel Bracket
Arm Screw and
Lockwasher
1/2
(13)
7/8
(22)
3 holes for
3/16 (4.8) wood
or M5xP0.8 machine screws
Ø
Hinge Edge of Door
3/4
(19)
3
(76)
4-1/8
(105)
9-1/16
(230)
Speed Regulating Screws
Away From Hinge Edge of Door
4 Holes for Ø7/32 (5.6) Wood Screws
or M5xP0.8 Machine Screws
SPEED- Door closing and latching speeds are controlled by
"1", "2" speed regulating screw separately.
A: Clockwise turns slow the speed. B: Counterclockwise turns
increase the speed.
1
2
Closing Speed
Regulating Screw
Latching Speed
Regulating Screw
Fast
Slow
B
A
Speed
Latch
LEFT HAND DOOR SHOWN.
Same dimensions apply for Right Hand
door measured from hinge edge.
Do not scale drawing.
All dimensions given in inches (mm).
ADJUSTMENT INSTRUCTIONS
1. Use dimensions shown in above template to mark (4) four holes
on door for closer and (3) three holes on frame for parallel
bracket.
2. Drill pilot holes in door and frame for Ø7/32" (5.6) wood screws
or M5xP0.8 machine screws.
3. Mount closer on door with SPEED REGULATING SCREW
AWAY FROM HINGE EDGE.
4. Attach parallel bracket to door stop as illustrated.
5. Using a wrench on the square shaft on bottom of closer, rotate
shaft approximately 45° toward hinge edge of door. Hold and
place main arm on shaft on top of closer and proper index mark
as illustrated.
FOR LEFT HAND DOOR NO. 3 (ILLUSTRATION "A").
FOR RIGHT HAND DOOR NO. 2 (ILLUSTRATION "B").
6. Mount arm shoe and parallel bracket with M5x6mm screws.
7. Adjust length of forearm to connect main arm (The main arm will
be slightly away from door.) and assemble at elbow then tighten
locknut.
PARALLEL ARM INSTALLATION INSTRUCTIONS
Forearm
Locknut
Main Arm
4
1
2
3
Index Mark
Left hand door, use index mark 3
ILLUSTRATION "A"
Forearm
Locknut
Main Arm
4
1
2
3
Index Mark
Right hand door, use index mark 2
ILLUSTRATION "B"
POSITION OF ARMS AND INDEX SETTINGS
1105 Door Closers
Installation Instructions
An ASSA ABLOY Group brand
9610 INS-J574 4/10R
