Assa Abloy TRAKA32, Руководство пользователя

Страница: 429 / 919

V3.5 14/08/19 UD0089 Page 429
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
3.19.5.3 ADDING FAULT DETAILS
A Fault Detail is a type of fault applicable to the items your iFobs are managing. For example, if your iFobs are used to
hold vehicle keys, one applicable fault detail could be ‘Faulty Brakes’.
1. From the main toolbar click View, Fault List.
2. Select the Fault Details tab.
3. From the fault list click on the Faults menu followed by Add New.
NOTE: If you already have a fault record open you can create a new record by simply clicking on
the button.
4. Enter the relevant information for the Fault Detail…
C
ritical: Select whether the fault will be a ‘critical’ or ‘non-critical’ fault.
Index: Select the index number from the dropdown. The range of numbers available will be dependent on
whether you selected ‘critical’ or ‘non-critical’, and only unused numbers will be displayed. Critical faults have
an index range from 1 to 127, and non-critical faults are between 128 and 255.
Description: Enter a description for the Fault. This description will appear in the Outstanding Fault List in the
‘Fault Name’ column.
Check to be carried out: Enter a description for the work to be carried out in order to fix this fault.
5. To Save your changes, simply click on or . To Cancel your changes, simply close the window and click
‘No’ when asked to save the changes.