Assa Abloy TRAKA32, Руководство пользователя

Страница: 152 / 919

V3.5 14/08/19 UD0089 Page 152
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
2.6.5 CONFIGURING IFOBS
The Traka Systems work on fixed iFob replacement basis which means the iFobs must be returned to the position from
where they were taken (unless using the custom Random Return option - see note below). By default the system will
not know where each iFob should go therefore the iFob serial numbers must be associated with the position in the
system and the Traka32 software.
NOTE: If your system is setup for Random Return to Multiple Systems (RRMS) this process does not apply.
Please refer to the Random Return to Multiple Systems Setup for more details. If your system is Random
Return to a Single System (RRSS) continue to follow this process.
1. Ensure the Traka System is loaded with an iFob in every slot.
2. When you have configured the systems you can view the system by clicking on View followed by System
Viewer. This is the default view that will be shown whenever the software is loaded.