8
800-810-WIRE (9473) • www.sargentlock.com • A7690C
4/15/08
Copyright
©
2008 SARGENT Manufacturing. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing is pr
ohibited.
C. Installation Notes:
1. With new applications, a raceway harness with 8 & 4-pin connectors will be pre-installed inside the door by ASSA ABLOY
door manufacturer when specified during the ordering process. Raceway harness kits are also available for retrofit
applications. For retrofit applications, refer to retrofit instructions
2. If door does not have a raceway harness with connectors, either consult factory for raceway retrofit kit or cut connectors off
product and hard wire, as required
3. Wiring to pigtail harness is per facility wiring requirement. The rail, raceway, electric hinge and pigtail connector terminations
and wire colors all match
Exit Device Installation (continued)
Installing 59-8300/12-59-8300 Series Mortise Lock Exit Device
CAUTION – BEFORE STARTING:
• Check hand of door (This exit device is handed and not reversible)
• Door should be fitted and hung
• Verify box label for size of exit device, function and hand
PREPARE DOOR AND MOUNT LOCK
–
Refer to Instruction Sheet A6696
1. Feed wire and connector through the mortise opening
and out the inside diameter
Rail wire &
connector
Wire &
connector
Chassis
Wire holder
Chassis
arm
Vertical reference line CL chassis
Mortise lock body
Left hand reverse
bevel illustrated
Inside Of
Door
IMPORTANT: Surface of door where exit
device is to be applied must be flush.
Clear away any raised projections to allow
exit device to rest on flat surface of door
Cover
8400 Main Chassis Cover Dwg
8300 Mount Lock Dwg
Wire & connector
Inside
diameter
Rail assembly
General Touch Bar
Lock Down Key —7/32” hex key
To operate: Depress pushrail,
insert hex key and turn clockwise.
(Not furnished with 12-)
Push rail
A7690C.indd 8
11/8/18 9:01 AM
