4
351 PARALLEL ARM APPLICATION INSTRUCTIONS
A
B
C
INSTALL DOOR CLOSER TO DOOR WITH SPRING ADJUSTMENT
NUT AWAY FROM HINGE.
ATTACH FOOT BRACKET TO FRAME STOP.
OPTIONAL ARMS FOR MOUNTING. SEE DATA
SHEET ENCLOSED.
7"
9 7/8"
10 1/4"
7 3/8"
120°
DIM.
B
DIM.
A
MAX. DOOR
OPENING
180°
TOP OF
DOOR
STOP
C OF HINGE PIVOT
DIM. A
L
TOP VIEW
1 1/4"
2 1/2"
5/16"
7/8"
1/2"
DOOR
C OF HINGE PIVOT
(BUTT HINGE SHOWN)
FOR USE WITH
OVERHEAD
DOOR HOLDERS
P4 OR P4A
BRACKET
FOR FLUSH FRAME
AND DOOR CONDITIONS
P4A BRACKET IS USED
WITH OVERHEAD HOLDERS
P3 OR P3A
BRACKET
(SARGENT
#590 SHOWN)
DIM. B
2 3/8"
2 1/2"
#12 WOOD SCREWS
OR #12-24 x 5/8 FLAT HEAD
MACHINE SCREWS
RIGHT HAND
DOOR SHOWN
USING WRENCH ON BOTTOM END OF SPINDLE, ROTATE SPINDLE 45∞ AND ASSEMBLE
MAIN ARM TO CLOSER AS SHOWN, AND THEN INSERT ROD END INTO SWIVEL ARM AND
TIGHTEN ARM SCREW POSITIONING ARM 1 1/2" AWAY FROM DOOR.
#12 X 3" WOOD SCREWS
OR #12-24 X 2 1/4"
MACHINE SCREW
SEE PAGE 6 FOR
MORTISE NUTS
9"
RH
CAUTION: DOOR CLOSER
WILL NOT OPERATE
PROPERLY IF ARM IS NOT
INDEXED CORRECTLY.
LEFT HAND VIEW OF INDEX
45°
PRELOAD
APPROX. 50°
POSITION OF MAIN ARM
WHEN ASSEMBLINGTO SPINDLE
RIGHT HAND
DOOR
FOOT BRACKET
ARM SCREW
MAIN ARM
ROD
1 1/2"
INDEX MARK
ON SPINDLE
MAIN ARM
INDEX MARK
ON SPINDLE
RIGHT HAND VIEW OF INDEX
45°
MAIN
ARM
1 2
3
4
5
1
2
3
4
5
L
LEFT HAND DOOR SHOWN. RIGHT HAND
DOOR DIMENSION OPPOSITE.
1
2
DO NOT USE THIS MOUNTING FOR
“SWING CLEAR” HINGES.
3
THIS DIMENSION IS TAKEN FROM HINGE
EDGE OF DOOR FOR INVISIBLE HINGES.
DRILL & TAP AND USE SCREWS PROVIDED OR USE
MORTISE NUTS WHEN REQUIRED.
NOTE: 351 CLOSER BODIES ARE NON HANDED.
IT IS IMPORTANT THAT THE CLOSER BODY BE
MARKED WITH “RH” SYMBOL AT TOP, FOR RIGHT
HAND DOORS. “LH” SYMBOL AT TOP FOR LEFT HAND DOORS.
A7340C
Copyright © 2003, 2008, 2011 Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of
Sargent Manufacturing Company is prohibited.