LEFT
HAND DOOR
RIGHT
HAND DOOR
PULL
HINGE SIDE
PULL
HINGE SIDE
STOP (PUSH) SIDE
STOP (PUSH) SIDE
STANDARD APPLICATION
(TYPE 25-O ARM)
TOP JAMB
APPLICATION
(TYPE 25-O, 25-OZ
AND 25-OZA ARMS)
PARALLEL ARM
APPLICATION
(TYPE 25-P9)
CLOSER MOUNTED ON
HINGE SIDE OF DOOR
CLOSER MOUNTED ON
STOP SIDE OF DOOR
CLOSER MOUNTED ON FRAME
ON STOP SIDE OF DOOR
NOTE: FOR 08 AND OLC TYPE ARMS MOUNTING
SEE DATA SHEETS ENCLOSED
NUMBER OF TURNS OF SPRING POWER ADJUSTING SCREW
FROM FACTORY SETTING
(USE CHART AS GUIDE ONLY)
DOOR WIDTH
(INCHES)
24
30
32
36
40
42
44
46
48
OVER 48
351
EXTERIOR DOORS
FACTORY SET
1-4 CW
4-7 CW
7-10 CW
10-12 CW
UP TO 18 CW AS REQ.
INTERIOR DOORS
1-5 CCW
FACTORY SET
1-5 CW
5 CW AND UP AS REQ.
APPROXIMATE
DOOR WEIGHT (POUNDS)
80
110
115
130
150
155
165
170
180
NUMBER OF TURNS OF SPRING POWER ADJUSTING NUT
FROM FACTORY SETTING
(USE CHART AS GUIDE ONLY)
DOOR WIDTH
(INCHES)
24
30
32
36
40
42
44
46
48
OVER 48
351
EXTERIOR DOORS
2-6 CW
6-8 CW
8-11 CW
11-13 CW
UP TO 18 CW AS REQ.
INTERIOR DOORS
1-5 CCW
FACTORY SET
1-7 CW
8 CW AND UP AS REQ.
APPROXIMATE
DOOR WEIGHT (POUNDS)
80
110
115
130
150
155
165
170
180
ADJUST SPRING POWER ACCORDING TO CHART*
ADJUST SPRING POWER ACCORDING TO CHART*
INCREASE
POWER
CLOCKWISE
(CW)
DECREASE
POWER
COUNTER CLOCKWISE
(CCW)
+
-
*IF INTERIOR DOORS DO NOT HAVE TO COMPLY WITH ADA REQUIREMENTS, EXTERIOR DOOR SETTINGS
ARE RECOMMENDED. WHERE STRONG DRAFTS EXIST, INCREASE SPRING POWER AS NEEDED BY TURNING
SPRING ADJUSTMENT SCREW CLOCKWISE. IF NECESSARY, REDUCE SPRING POWER BY TURNING SCREW
COUNTERCLOCKWISE.
5/8" SPRING POWER
ADJUSTMENT NUT
USE
PAGE 2
USE
PAGE 3
USE
PAGE 4
1
1
A7340C
Copyright © 2003, 2008, 2011 Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of
Sargent Manufacturing Company is prohibited.
MODEL 351 POWERGLIDE SERIES
INSTRUCTIONS FOR INSTALLING SARGENT DOOR
CLOSERS WITH REGULAR ARMS (WITHOUT HOLDER)
351 SERIES NON SIZED ADJUSTABLE SIZES 1 THRU 6
CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE.
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477.
STANDARD & TOP JAMB APPLICATIONS
PARALLEL APPLICATION ONLY