Installation Instructions
IS-W0700 (06-09)
W0700 Series Overhead Concealed Closer (Wood Door & Frame)
W0700 Series, Offset Hung Single Acting, Handed
PAGE 4
Rixson
866-474-9766 Technical Department
www.rixson.com
Rixson
866-474-9766 Technical Department
www.rixson.com
7. Adjust closing speed of door
To decrease speed turn valve clockwise. To increase
speed turn valve counter clockwise
To increase backcheck, turn valve clockwise, to decrease
backcheck turn valve counter clockwise
Notes:
1. Do not scale drawing.
2. Right hand shown.
3. For use on doors with a minimum 7/8" deep top mortise.
DO NOT use this template for head frames less than 2"x4-
1/2" wide. For 1-3/4" thick doors only.
4.
.
5. All dimensions are in inches. Metric = 25.4 x inch.
No. 0198 mounting plate included. See template OC60210
CL
TOP VIEW OF HEAD FRAME
HEAD FRAME INSTALLATION
1/4
1/2
1-9/16
1-9/16 1-3/8
1-3/8
45°
1/2
1/4
9/32 Dia. Mounting Holes
#14 x 2" Wood Screw
(4 Places)
3-23/32
Max Width
of Closer
1-23/641-39/64
1-39/64
17-1/2
2
CL
SIDE VIEW OF HEAD FRAME
Spindle
31/64
1/2
1-7/64
From Bottom of
Head Jamb to Top
of Mounting Tabs
(Critical Dim.)
1-15/32 Max. Height
of Closer
UNDERSIDE OF HEAD FRAME
18-3/4
17-1/2
9-1/2
2-3/4
1-1/2
17-27/32
5/16 Dia. Holes for
10-24x5/16 FHMS
Cover Plate Screws
(6 Places)
1-7/16 Dia. Hole
In Cover Plate
1/2
Cover Plate Cutout
18-1/4 x 3-3/4
1-3/8
1-3/8
31/32
31/32
9/32 Dia. Holes for
Adjusting Valves
(2 Places)
2-1/4
CL
1-23/64
2-1/4
From Pull Side
Of Head Frame
1-1/4
7/8 Min. Stop
Cutout
14-3/4 Length of Stop Cutout
Removable stop by others.
Length to be width of head
frame between side jambs.
From Pull Side
of Head Frame
Critical Dim.
Door
Closer
1/16
Clearance
Door Hanging
Method
Closer
No.
Butt
Hinge
3/4 Offset Side
Jamb Pivot
4 x 4
4-1/2
x
4-1/2
W070090
W0700105
W070090
W0700105
W070090
W0700105
Max.
Degree
Dim.
"A"
86°
106°
88°
108°
93°
113°
7/8
7/8
7/8
1-5/8
DOOR INSTALLATION
CL
#12 x 1-1/2" FHWS
(4 Places)
TOP VIEW OF DOOR
PUSH SIDE OF DOOR
4-1/2" OR WIDER
HEAD FRAME
1-1/8
9/16
17-1/8
13-5/8
6-5/8
10-1/8
7/8
7/8
9/16
17-7/8
5-7/8
1/16
Clearance
7/8
1/8 Clearance
7/8
1-5/16
1-1/16
Inside Dim.
Critical
1-7/8
Min. Inside
Dim.
Closer & Frame
CL
Door & Rail
1-5/8
From Top of
Closer to Face
of Head Frame
CL
Hinge
Edge of
Door
Cutout
In Hinge
Edge of
Door
A
ASSA ABLOY
RIX SON
®
Adjust this valve to
increase or decrease
backcheck
Adjust this valve to
increase or decrease
speed of door
ASSA ABLOY
RIX SON
®
Rixson® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Copyright© 2007, 2009, Yale Security Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
