Grade 1 Key-In-Lever VR Lever Lock
Installation Instructions
CL3100 Series
FM345 01/19
For Installation Assistance contact Corbin Russwin
1-888-607-5703 • [email protected]
Copyright © 2016, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
4
2
Door and Frame Preparation
a
Mark Door
Figure 2
Mark Door
b
Drill Door
Figure 3
Drill Door
c
Install Strike
Figure 4
Install Strike
• Cut rectangular front recess.
• Mark recess for latch bolt.
• Mark outline of strike.
• Cut recess for latch bolt.
• Install strike; secure with two (2) screws.
IMPORTANT
Dead locking plunger stops on strike when door is closed.
• Fold door marker (FM347) on the door and mark the hole centers.
• Bore 2-1/8" hole.
• Bore 1" hole.
38"
High edge of
beveled door
Finished
floor
2-1/8"
1"
beveled door
Beveled door
High edge of
beveled door
Finished
floor
1"
2-1/8"
38"
1-1/8”
2-1/4”
5/32” DEEP
RECESS
DESIRED BACKSET
Desired backset
1-1/8"
2-1/4"
5/32" Deep recess
Centerline of
front strike
Centerline of
front strike
Dead locking
plunger
Strike
Dead locking
plunger
Strike
