ASROCK X99 WS-E, Руководство пользователя, Страница: 40 / 207

38
English
2.10 SATA DOM (Disk on Module) Installation Guide
Installing the Serial ATA Disk On Module ( DOM )
SATA_0
Step 1
Locate the
SATA DOM Connector
(SATA_0)
on the motherboard and
install the SATA DOM Card.
SATA_0 SATA_PWR1
or
SATA_0
SATAPWR1
1 2 3
Step 2
Consult the documentation that
comes with your SATA DOM and
check whether or not Pin 7 requires
5V power supply.
If Pin 7 re5V power supply:
Move the jumper caps placed on
the
SATA DOM Power Jumper
(SATAPWR1)
from pins 2-3 (default)
to pins 1-2.
If Pin 7 does not r5V power
supply:
Connect the SATA DOM power
cable to the
SATA DOM Power
Header (SATA_PWR1)
.
*here is no need to change the
default jumper setting of the
SATA
DOM Power Jumper (SATAPWR1)
.
*he illustrations above are for reference only.
Warning
: Incorrect setting of the SATA DOM Power Jumper (SATAPWR1) may cause
damage to the motherboard or your SATA DOM.