ASROCK X58 DELUXE, Руководство по установке, Страница: 17 / 192

1 7 1 7 1 7 1 7 1 7
ASRock X58 Deluxe Motherboard
EnglishEnglishEnglishEnglishEnglish
1. In single VGA card mode, it is recommended to install a PCI Express
x16 graphics card on PCIE1 slot.
2. In CrossFireX
TM
mode or 2-Way SLI
TM
mode, please install PCI
Express x16 graphics cards on PCIE1 and PCIE3 slots. Therefore,
both these two slots will work at x16 bandwidth.
3. In 3-Way SLI TM mode, please install PCI Express x16 graphics
cards on PCIE1, PCIE2 and PCIE3 slots. Therefore, PCIE3 slot will
work at x16 bandwidth while PCIE1 and PCIE2 slots will work at x8
bandwidth.
4. In Quad CrossFireX TM mode, please install PCI Express x16
graphics cards on PCIE1, PCIE2, PCIE3 and PCIE4 slots. Therefore,
all these four slots will work at x8 bandwidth.
5. Please connect a chassis fan to motherboard chassis fan connector
(CHA_FAN1 or CHA_FAN2) when using multiple graphics cards for
better thermal environment.
Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card
Step 1. Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the system unit cover (if your motherboard is already installed in a
chassis).
Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws
for later use.
Step 4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 5. Fasten the card to the chassis with screws.
Step 6. Replace the system cover.