background image

English

35

X570 Steel Legend

AMD FAN LED Header
(4-pin AMD_FAN_
LED1)
(see p.8,  No. 7)

AMD FAN LED Header is used 
to connect RGB LED  
extension cable that comes with 
AMD heatsink. The cable  
connection allows users to choose 
from various LED lighting  
effects. 
*The AMD Fan LED Header is 
compatible with a regular RGB 
LED stripe.

Caution:

 

Never install the FAN 

LED cable in the wrong orienta-
tion; otherwise, the cable may 
be damaged.

RGB LED Header
(4-pin RGB_HEADER1)
(see p.8, No. 24)

This RGB header is used to  
connect RGB LED extension 
cable which allows  
users to choose from various LED 
lighting effects. 

Caution:

 

Never install the RGB 

LED cable in the wrong orienta-
tion; otherwise, the cable may 
be damaged. 

*Please refer to page 58 for  
further instructions on this 
header.

Addressable LED Header
(3-pin ADDR_LED1)
(see p.8, No. 23)

This header is used to connect 
Addressable LED extension cable 
which allows users to choose 
from various LED lighting  
effects. 

Caution:

 

Never install the 

Addressable LED cable in the 
wrong orientation; otherwise, 
the cable may be damaged. 

*Please refer to page 59 for  
further instructions on this 
header.

VOUT

DO_ADDR

GND

1

12V G R B

1

12V

G

R

B

1

Содержание X570 Steel Legend
































































































Отзывы: