manualshive.com logo in svg

ASROCK Taichi B550, Руководство пользователя, Страница: 77 / 102

Поделиться
Скачать
ASROCK Taichi B550 Скачать руководство пользователя страница 77

English

70

4.3  OC Tweaker Screen

In the OC Tweaker screen, you can set up overclocking features.

Overclock Mode(Bus Speed)

Select the overclock mode. Warning! When overclocking also the PCIe, PCI, SATA and 
USB busses will be overcloked which may cause instability or failure. Please install an 
operating system and the drivers required before overclocking, or else your HDD's may be 
undetectable. Overclocking is not supported if the monitor is connected via the onboard 
D-Bus/VGA connector.

CPU Frequency and Voltage(VID) Change

If this item is set to [Manual], the multiplier and voltage will be set based on user selection. 
Final result is depending on the CPU's capability. 

CPU Core (Per CCX)

CPU Voltage

Specifies a custom CPU core voltage (mV), Should be combined with a custom CPU core 
frequency. Power saving features for idle cores (e.g. cc6 sleep) remain active.

Because the UEFI software is constantly being updated, the following UEFI setup 
screens and descriptions are for reference purpose only, and they may not exactly 
match what you see on your screen.

Содержание Taichi B550







































































































Отзывы:

Нет отзывов