16
Backlight Power Select
Use this to set up the backlight
(LCD_BLT_VCC)
power of the LVDS connector.
(5-pin BKT_PWR1)
1-2: +5V
(see p.9 No. 4)
2-3: +12V
3-4: +12V
4-5: DC_IN Power
COM1 Pin9 PWR Setting
1-2: +5V
(3-pin SET_CM1)
2-3: +12V
(see p.9 No. 17)
Backlight Control Level
1-2: +3V
(3-pin BLT_PWM1)
2-3: +5V
(see p.9 No. 10)
1
mSATA Select
1-2: SA mini-PCIe
(3-pin MSATA_SEL1)
2-3: mSATA,
(see p.9 No. 9)
SATAII_2 no function
GPIO Default Setting
1-2: Pull-High
(3-pin JGPIO_SET1)
2-3: Pull-Low
(see p.9 No. 27)
Panel Power Select (LCD_VCC)
Use this to set up the VDD
(5-pin PNL_PWR1)
power of the LVDS connector.
(see p.9 No. 5)
1-2: +3V
2-3: +5V
3-4: +5V
4-5: +12V
1
EDP_LVDS_J2 Jumper
1-2: LVDS
(3-pin EDP_LVDS_J2)
2-3: eDP
(see p.9 No. 29)