background image

5

55

55

Chapter 1  Introduction

Chapter 1  Introduction

Chapter 1  Introduction

Chapter 1  Introduction

Chapter 1  Introduction

Thank you for purchasing ASRock 

Penryn1600SLIX3-WiFi

 motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control. It delivers
excellent performance with robust design conforming to ASRock’s commitment to qual-
ity and endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step
guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to
BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might
be updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest VGA cards and CPU support lists on ASRock website
as well.  ASRock website    http://www.asrock.com
If you require technical support related to this motherboard, please visit
our website for specific information about the model you are using.
www.asrock.com/support/index.asp

1.1 P

1.1 P

1.1 P

1.1 P

1.1 Pack

ack

ack

ack

ackage Contents

age Contents

age Contents

age Contents

age Contents

ASRock 

Penryn1600SLIX3-WiFi

 Motherboard

(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)

ASRock 

Penryn1600SLIX3-WiFi

 Quick Installation Guide

ASRock 

Penryn1600SLIX3-WiFi 

Support CD

ASRock 

WiFi-802.11g

 Module Operation Guide

Motherboard Accessories

One ASRock SLI Bridge
One ASRock 3-Way SLI Bridge
One 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable
One Ribbon Cable for a 3.5-in Floppy Drive
Four Serial ATA (SATA) Data Cables (Optional)
One Serial ATA (SATA) HDD Power Cable (Optional)
One HDMI_SPDIF Cable (Optional)
One “ASRock WiFi_eSATAII I/O Plus” I/O Shield

WiFi Accessories

One ASRock 

WiFi-802.11g 

Module

One Antenna

Содержание PENRYN1600SLIX3-WIFI

































































Отзывы: